IWI to retained window with secondary glazing [Version ID #82]

Author details

Original Author:Admin Organisation:

Detail summary

An IWI detail to head and jamb of an existing window (single glazed or other) where a a secondary double glazed window unit is to be added to the inside face of the window for improved thermal performance.

Technical description

Section Detail. IWI to secondary glazing, set within existing frame.

Psi cill value: 0.03W/m2k. Psi lintel valueL 0.03 W/m2k. Target wall value: 0.3W/m2k.

Preparation: Cills and framing : Remove existing internal cills and framing to window. Plaster : Where existing plaster is gypsum-based, or where space is required, remove existing plaster finish.

Parts list

  • Insulated Dry-Lining Board to window jambs and head

    Phenolic Foam Thermal Plasterboard with integral vapour control layer (plasterboard thickness: 12mm, insulation: 17mm thickness). Tapered edge. \ U-value: 0.21W/m2k. GWP<5. \ Adhesive scored bonding coat to ensure no air-gap to rear of board. Taped and filled joints. Prepared for plaster skim coat finish.

    Kingspan Insulation Ltd \ Kooltherm® K17 Insulated Plasterboard

  • Rigid insulation below cill

    Rigid insulation board. Thickness: 15-24mm (to suit window frame/ opening). \ U-value: 0.023W/m2k

    Kingspan Insulation Ltd \ Kooltherm® K3 Floorboard

  • Softwood Window Board to Sill

    Subject to contractor. Half-round edge. European redwood. Class 2 to BS 1186-3. Natural finish. No preservative treatment. FSC certified. Fixed with lost nail heads at 30mm centres

    Contractor choice.

  • Internal Wall Insulation System (95mm)

    Earthwool Eco batt insulation. Thickness 95mm\ Target u-value: 0.3W/m2k. Thermal conductivity: 0.033W/m2k/ 0.130W/mk. GWP<5. \ Fixing: In accordance with manufacturer's recommendations. Supports: EcoStuds - XPS and OSB uprights.

    Knauf \ ThermoShell Internal Wall Insulation System

  • Single-sided air seal tape

    Tape for junctions critical to air-tightness. 60mm (typical). \ Accesssories: ORCON F sealant and TESCON PRIMER RP (for use on rough/old surfaces to assist adhesion)

    Pro Clima \ http://www.greenbuildingstore.co.uk/page--pro-clima-airtightness-tapes-options.html \ TESCON VANA/ TESCON PROFIL (2 release tapes)

  • Intelligent membrane- Vapour Control Layer

    Intelligent breather membrane. \ Fixing: Laps And Edges: Sealed with vapour-tight adhesive tape. At junctions with party/patition walls, lap under insulated plasterboard. At floor and ceiling junctions ensure is appropriately sealed.

    Pro-clima \ Intello membrane

  • Secondary Glazing Systems - Proprietary Product

    Secondary glazing. \ Horizontal slider, heavy duty frame. \ Glazing : 20 mm low-e coated argon filled double glazing unit with warn edge spacers – toughened inner pane. \ White semi-gloss polyester powder coated.

    Duration Group \ www.duration.co.uk \

Revisions

  1. Admin - 2015-04-30 10:17:14

    DWg file uploaded. General formatting changes.

    |
  2. Admin - 2015-03-30 12:03:25

    Preview image and detail pdf updated.

    |
  3. Admin - 2015-03-29 11:13:53

    IWI supports added to parts list

    |
  4. Admin - 2015-03-29 11:06:13

    IW05b "insulated dry-lining board" replaced with "laminate plasterboard

    |
  5. Admin - 2015-03-26 23:02:29

    General re-formatting. Introduction adjusted. Technical description updated and expanded with additional BS codes and approved docs. Parts list updated with suppliers links.

    |
  6. Admin - 2015-03-16 13:54:25

    Introduction, and technical description updated with BS and approved docs. Parts list expanded and codes added.

    |
  7. Admin - 2015-03-03 17:28:59 [Displayed version]

    First version

    |
Leave a comment

Discussion

  1. For those who have seen the Earth from space, and for the hundreds and perhaps thousands more who will, the experience most certainly changes your perspective. The things that we share in our world are far more valuable than those which divide us.

    User name

Leave a comment


Feedback

A total of 14 users have left feedback about this detail.

Share your thoughts about this detail with other users:

Feedback summary

  • 80% of users found this detail easy to implement.
  • 50% of users found it easy to source skills for this detail.
  • 60% of users found this detail hard to understand.
  • 100% of users found the overall cost for this detail to be low.
  • 90% of users found materials for this detail easy to source.