Explore step by step

Available results

  1. Roof Insulation to eaves

    Detail to show the buildup of new loft insulation to the underside of an existing eaves, installed internally, to allow ventilation of the existing roof over the new insulation. A minimum ventilation gap of 25mm is to be provided over the loft insulation to allow sufficient ventilation at the eaves.

    In most cases, some loft insulation will already be installed in the roof space (typically to a depth of between 50-200mm) in which case it is only required to add enough insulation to increase this depth to 400mm to achieve target

    Target U-value:0.1W/(m².K)

    View detail →
  2. Roof insulation to flanking wall of a room-in-roof

    A roof insulation detail for the flanking wall of a room-in-roof or a storage space in roof, with additional loft insulation buildup as required to a minimum depth of 400mm to achieve the target U-value.

    In this detail, insulation is installed to the upright stud walls between a room-in-roof and the loft space; along with insulation and membranes in plane of the existing rafters (where the existing roof membrane is non-breathable). It is important to ensure adequate ventilation over any insulation installed in the plane of the existing rafters.

    In most cases, some loft insulation will already be installed (typically to a depth of between 50-200mm) in which case it is only required to add enough insulation to increase this to 400mm.

    View detail →
  3. Roof insulation at rafters

    Detail for insulation installed to the ceiling of a room in roof, to replace existing thin insulation.To increase thermal efficiency and prevent heat loss through the roof of the building. Insulation is shown in-plane of rafters where existing roof membrane is non-breathable. Ensure adequate ventilation between insulation and roofing membrane- minimum: 25mm or as shown on detail.

    Target U-value: 0.18W/m2K

    View detail →
  4. Roof insulation to existing underdrawn ceiling

    Insulated plasterboard fitted to the underside of existing ceiling rafters. For use where roof void is well ventilated or has breathable membrane and where existing ceiling is to be retained.

    View detail →
  5. Roof Insulation for Increased depth Rafters

    Detail for the internal installation of woodfibre insulation to an existing roof; where existing rafters are not deep enough to allow 200-250mm insulation to be installed. In this detail the existing rafters are extended with additional timber to fit insulation to the required depth.

    To be used only where a suitable vapour-permeable roofing membrane is present above. (check brand and sd value upon inspection of roof).

    Target U-value : 0.18W/m2K

    View detail →
  6. Roof Insulation- Existing membrane LR

    Roof insulation to existing rafters, where the existing roofing membrane below tiles/slates is a Low Resistance (LR) membrane. [See Technical Description for definition as of BS 5250: 2011]

    Insulation in plane of rafters where existing roof membrane is low resistance vapour permeable. Need to ensure adequate ventilation behind insulation.

    Insulation boards and proprietary basecoat finish with vapour control render applied to inside face of insulation.

    View detail →
  7. Roof insulation- Existing non-permeable membrane (HR)

    Detail for the insulation of roof rafters, internally, where the existing roofing membrane within a roof is impermeable/ High resistance (HR underlay to BS 5250: 2011); and as such: a minimum ventilation gap must be provided to the eaves in order to ventilate the roof space.

    This detail demonstrates the installation of new insulation, to a depth of 200-250mm to achieve the target U-value, to the existing rafters with a 50mm ventilation gap behind to ensure adequate ventilation of the new insulation.

    Target U-value: 0.18W/m2K

    View detail →
  8. A test detail

    Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

    View detail →